Tie Rod Tapered Sleeve TJ, XJ, YJ, WJ

A Tapered Sleeve used to change the tie rod stud entry point from the bottom to the top on TJ, XJ, YJ and WJ Stock Knuckles

This Sleeve is designed for installation on stock or factory knuckles. The center taper is the stock TJ taper of 1-1/2" per foot or 7.153 degrees. The outside diameter is 0.75" to allow for less material loss on the smaller factory knuckle. This sleeve is used when the steering linkage is flipped on top of the knuckles to allow for more clearance with trail obstacles.

• Note: Requires drilling your stock knuckle with 3/4" drill. This item is to be installed by professionals.